Go Back

Learn the Right Way to Fix a Leaky Garden Hose

Did you spend the summer and fall months fighting with a leak in your garden hose? If you’re feeling frustrated at the wasted water and impact that garden hose leaks can have on your water bill, then you may be considering running out and buying a brand new hose.

how-to-fix-a-leaky-garden-hose-header-1

However, instead of over-spending you can invest a little time and energy into DIY garden hose repairs, and save yourself the cost of purchasing a new hose. How can you solve garden hose leaks, provide yourself with peace of mind, and prevent wasted water and higher monthly bills? Keep reading to find out:

Finding the Leak

damaged-hose-1The first step to repairing your garden hose is to figure out where the leak is coming from. To do this, attach a spray nozzle to the end of your garden hose and turn on the water, and watch to see where leaks form as pressure builds up inside the hose.

If the leak is coming from the hose itself, make sure to mark the area with a permanent marker so that you will still know where to perform your repairs when the flow of water stops.

Is your hose leaking?

If your hose is leaking, then mark the area with a marker and use garden shears to remove the compromised section of the hose. Then, using a hose repair kit (which can be purchased at your local hardware store), use the clamps and coupler to re-attach the sections of hose and restore it to perfect working order.

Is the hose bib leaking?

One of the most common areas where leaks may form is the faucet which attaches your hose to your plumbing system, which is also known as the ‘hose bib.' If the leak is coming from this location, the first step is to determine if the packing nut needs to be tightened or replaced. You can easily tighten it with a wrench, or remove it and replace it with a new one.

replacing-a-washerIf tightening or replacing the packing nut doesn’t work, try wrapping a piece of Teflon tape around the stem of the faucet to prevent water from escaping before screwing the packing nut back into place and turning the water on.

Is the hose connector leaking?

If your hose connector is leaking then the issue may be due to a damaged gasket, so make sure to check this section first before moving forward.

If the gasket appears to be intact, then you will likely have to remove the end of the hose and replace it. To do this, pick up a hose barb kit and snip the end off of your hose, then use the kit to attach a replacement.

Contact y-skoda.ru today at 713-896-9700 and get fast and effective solutions for your plumbing needs in Houston, TX.